 |
|
|
DMX16 4 modules 
DMX32 8 modules 
DMX64 16 modules 
|
Each module has 4 inputs and 4 outputs for either digital audio stereo pairs (S/P DIF, AES/EBU, T-DIF) or, when optical, for ADAT eight channel "lightpipe" signals. Any combination of the different modules can be assembled into one matrix, so various formats can share the same matrix and even format conversion is possible within the matrix using the MQ4, MQA and MQT modules. Signals up to 24 bit and 96 kHz can be received and transmitted on AES/EBU and S/P DIF stereo lines, while ADAT "lightpipe" is limited to 50 kHz, but with upto 24 bit wordlength. 8 channel ADAT signals with 48 kHz can be routed as well as 4 channel ADAT signals (SMUX) with 96 kHz. |
|
MQA Quad AES/EBU-SP-DIF <> ADAT Converter Module The MQA offers one ADAT input and one ADAT output on the rear, and is connected to 4 sources and 4 destinations of the matrix inside the DMX16/32/64. The MQA detangles the ADAT "lightpipe" signal into 4 digital stereo signals (1/2, 3/4, 5/6, 7/8) which appear in the matrix as 4 sources. Each stereo signal can be routed to any destination in the matrix, whereby CONSUMER or PROFESSIONAL format can be selected. Four digital stereo signals with different formats (SP-DIF or AES/EBU) and even with different sample rates can be routed to the MQA module and are merged into one ADAT "lightpipe" signal. The four sample rate converters on the MQA module are synchronized to the ADAT input or to an external WORD-CLOCK at the BNC connector. ADAT <> TDIF conversion is possible with an additional MQT module. |
 |
|
|
|
MQT Quad AES/EBU-SP-DIF <> TDIF Converter Module The MQT offers one TDIF input/output on the rear and is connected to 4 sources and 4 destinations of the matrix inside the DMX16/32/64. The MQT detangles the received TDIF into 4 digital stereo signals (1/2, 3/4, 5/6, 7/8) which appear in the matrix as 4 sources. Each stereo signal can be routed to any destination in the matrix, whereby CONSUMER or PROFESSIONAL format can be selected. Four digital stereo signals with different formats (SP-DIF or AES/EBU) and even with different sample rates can be routed to the MQT module and are merged into one TDIF signal. The four sample rate converters on the MQT module are synchronized from the WORD-COCK at the TDIF input. TDIF <> ADAT conversion is possible with an additional MQA module. |  |
|
|
|
MQ4 Quad Format Quad Sample Rate Converter Module The MQ4 is connected to 4 sources and 4 destinations of the matrix inside the DMX16/32/64. Four digital stereo signals with different formats (SP-DIF or AES/EBU) and even with different sample rates can be routed to the MQ4 module to change format (CONSUMER / PROFESSIONAL) and sample rate. Sample rate conversion is clocked from the BNC clock input. |
 |
|
MAES 4 x transformer balanced in/out the MAES module offers 4 transformer balanced inputs and 4 transformer balanced outputs with AES/EBU specification: 110 ohm, sensitivity 200 mV, output 3 Vpp, connected via a D-SUB 25 connector, an XLR breakout cable with 1.70 meter is also available. |
 |
|
MCO4 4 x coaxial in/out the MCO4 offers 4 coaxial inputs and 4 coaxial outputs with SP-DIF specification: 75 ohm, sensitivity 100mV, output min. 0.5 V |
 |
|
MOP4 4 x optical in/out the MOP4 offers 4 TOS LINK inputs and 4 TOS LINK outputs which can receive and transmit optical SP-DIF signals upto 96 kHz or ADAT "lightpipe" signals up to 50 kHz. |
 |
|
M2-2 2 x coaxial in/out 2 x optical in/out the M2-2 offers 2 coaxial inputs and 2 coaxial outputs with SP-DIF specification (see MCO4) and 2 TOS LINK inputs and 2 TOS LINK OUTPUTS for SP-DIF signals or for ADAT "lightpipe" signals (see MOP4). |
 |
|
| DMX 16 | DMX 32 | DMX 64 | MODULES | PRODUCTS | HOME | TOP | © 2007 by Friend-Chip. |